An Example of Conveyor Simulation

Contoh simulasi conveyor

Terdapat 2 conveyor .

Bila tombol start ditekan, conveyor B akan berjalan sampai terdetek sensor B(namun disini benda yang akan mengaktifkan sensor menggunakan timer, di ibaratkan pada saat timer aktif menandakan sensor terdetek), sehingga conveyor B berhenti .

Pada saat Conveyor Bberhenti maka conveyor A berjalan.

Conveyor A berjalan sampai 5 box terdeteksi oleh sensor A(seperti di atas counter akan di aktifkan oleh timer secara teerus menerus mencapai setpoint yang sudah ditentukan), sehinnga conveyor A berhenti, kemudian menunggu beberapa detik dan conveyor B berjalah sehingga siklus berulang.

Berikut Screen Shoot dari Ladder Diagram dari soal di atas

An Example of Conveyor Simulation

Thre are two Conveyors

If start button is pressed, the Conveyor B will work until sensor B is detected (but here the timer use to actived the sensor, use timer as a box), so that timer will make conveyor B stop .

When Conveyor B is stopping, the Coveyor A work.

Conveyor A work until five boxes is detected by sensor A (like the sensor B , counter above will actived by timer until setpoint is reached), so the conveyor A stop, then wait for few second and the conveyor B will work. this siclus is repeateedly.

This is the Conveyor Ladder Diagram screen shoot



Ladder di atas saya buat menggunakan Software Zelio Ladder above i made use a Software named Zelio

ANIMASI
Klik this, it’s important for tou !😀

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: